Visit Legrand.com
Neigbare Wandhalterungen für Flachbildfernseher von 37 bis 90 Zoll
LT25
Dieses Produkt ist nicht mehr erhältlich.
- Passend für TV-Geräte 37" - 90"
- Depth 3.00"
- Neigbar 10° / -8°
-
Safety Tested and UL Certified
Safety tested and UL Certified
LT25 is rated
out of
5 by
10.
Will this work with my TV?
Enter the model number of your TV to find out.
Here are a few products that are compatible with your TV!
Videos als Starthilfe
SANUS LT25 Video über Funktionen
SANUS LT25 Video zur Installation
Was bedeutet neigbar?
Neigbare Wandhalterungen für Flachbildfernseher von 37 bis 90 Zoll
Die neigbare VisionMount-Halterung für große Flat-TVs. Die Virtual Axis™-Technologie für mühelose Einstellung des Blickwinkels. ProSet™ für Höhen- und Ebenenverstellung nach der Installation, stellt sicher, dass der TV perfekt positioniert ist. Das ClickStand™-Feature halt den TV von der Wand entfernt zur Kabelinstallation und Wartung. Die ClickFit™-Technologie einen Überspannungsschutz direkt in die Mitte der Halterung anzubringen. So ist er zwar versteckt, aber auch jederzeit gut zugänglich. Extrastarke Stahlkonstruktion. Universelles Halterungsmuster passt für Flat-TVs mit einer Bilddiagonale zwischen 37 und 90 Zoll sowie 79 Kilogramm.Product Features
Tools You Will Need For Installation
-
4,76 mm (3/16") Bohrer
-
7,94 mm (1/2") Steinbohrer (Installationen auf Beton)
-
11 mm (1/2") Steckschlüssel
-
Ahle
-
Elektrische Bohrmaschine
-
Wasserwaage
-
Stift
-
Kreuzschlitzschraubendreher
-
Stützensucher (falls benötigt)
Auszeichnungen
-
Custom Retailer 2008 Exc!te Award
The Details
| Produktmarke: | SANUS |
|---|---|
| Modellcode: | LT25 |
| UPC-Strichcode: | 793795363398 - Schwarz - Wird nicht mehr hergestellt |
| Produktbreite: | 30.00" / 76.20cm |
| Produkthöhe: | 18.25" / 46.36cm |
| Product Depth: | 3.00" / 7.62cm |
| Produktgewicht: | 12.00lbs / 5.44kg |
| Paketbreite: | 31.25" / 79.38cm |
| Pakethöhe: | 3.75" / 9.53cm |
| Pakettiefe: | 13.50" / 34.29cm |
| Paketgewicht: | 14.00lbs / 6.35kg |
| Größenbereich des Fernsehers: | 37" - 90" / 93.98cm - 228.60cm |
|---|---|
| Max. Gewicht des Fernsehers: | 175lbs / 79.38kg |
| Universal Mounting: | Yes | 75 x 75 through 699 x 440 i |
| Supported VESA Patterns |
|
| Neigen: | 10° / -8° |
| Drehen: | 2° / -2° |
Recommended Products for You
Rated 1 out of
5
by
Fran from
Mine never worked properly and fell apart.
I spent a long time fitting mine but when I got to the very last stage, slipping the bottom clips onto the rail, it just would not clip. I struggled to get it to clip and in the end it did, but the clip handles bent and the right hand vertical adjuster screw slipped and stripped it's thread. I had to adjust the other one to get it level. I'm worried it will fall down.
Currys/PC World have offered me 10% discount which is not enough. Sanus are looking to see if they have any spare parts. I am still trying to get a satisfactory resolution.
Date published: 2016-09-19
Rated 5 out of
5
by
erehwon from
Forgiving and worth the premium
I could have purchased a less expensive mount. I purchase this mount because of the quality of the materials and the ability to adjust the installation after securing the mount to the wall. It is very forgiving, providing good vertical and leveling adjustments. There are mounts to be had for less than half the price, but for me the ability to recover from install errors without patching the wall was well worth the premium. In addition, I am confident that it will stay on the wall. It met my expectations.
I chose this mount over the VMPL3 because it appeared to be easier to install at the cost of not centering perfectly for larger sets. I was very happy with the choice. As noted in one of the reviews, the LT25 will not center perfectly on 16 inch studs with larger sets. This is because larger sets do not have as much room to slide horizontally on the track to move the set to a perfect center. If this is not an issue, as in over a fireplace, this mount is a great choice.
The install process was straight forward, follow the directions and take your time. The on line directions for finding the mounting height were very helpful, but as noted in the online directions, you need to double check the set measurements. They are not as accurate as one would hope, but close enough in my case. The hardest part is finding the correct height from the floor. I recommend marking the set out on the wall with painters tape to see if you like the position from your favorite seats and measuring at least twice before drilling.
The process is very forgiving, as long as you are within a few inches in hight and close to level (which is easy to do). The center spot has limited flexibility for larger sets, but is easy to find on the mount and position on the wall. If the hight is off by much you can adjust the bars on the set. If it is off level by <.5 inch you should be able to level it using the adjustment screws. (One full turn of one screw put my set at perfect level.)
Notes:
1. There is a lot of "wire room"
2. The "kick stand" feature to hold the set out from the wall when working with the wires is great.
3. The safety warnings about working on the wires when the kick stand is out and the set is not locked need to be followed.
4.The mount appears to be rock solid and attaches firmly to the studs.
5. The directions are good, but not "Ikea" directions. You need to read them before starting.
6. The parts set was complete. The bolts are of the quality need for this kind of product.
Improvements:
1. I could not find a clear indication of where I should attach the bars to the set relative to the top screw hole. The picture in the directions would be more specific. The success of the online measurements hinge ( no pun intended) o the position of the bars.
2. I recommend changing the measuring directions. Rather that positioning the mount on the wall and marking the holes I recommend positioning the mount as indicated and marking one hole. Drill and attach at that hole, but do not tighten. Swing the mount into a level position and mark the other hole. This can be easily done with one person, and allows for a slight correction if the first hole is off slightly. It prevents having a second hole that is not perfectly centered.
Date published: 2013-03-06
Rated 5 out of
5
by
dysonlu from
Premium product!
The product is made of quality material. The number of parts included in the package is impressive and thorough. The mount itself has a complete set of features that makes it a versatile and good all-around product.
I bought the earlier version of the product which comes with an earlier revision of the instructions manual. The manual could have been more verbose and clear but not a major problem as the website does provide plenty of supplemental info and help for installation which is an aspect that wins a lot of points in my book -- this shows the company does stand behind its product and value customer service.
A friend who helped me with the installation was so impressed by the product that he asked me what brand it was, where I bought it and how much I paid. He was also pleasantly surprised by the amount of help material and by the comprehensive set of parts that came with the product.
All this makes the LT25 a premium product at an reasonable price. I am very satisfied with my purchase.
Date published: 2012-06-21
Rated 2 out of
5
by
Mike100 from
A good mount ... BUT
This is a very nice mount. The quality and features are excellent. BUT ... how good all this if it is too short? It was rated to fit my TV (Panasonic 50"), but:
- I had to switch sides for the vertical rail to allow just a little more clearance just to mount to my TV;
- One of the studs was dead in the center of my TV/desired position, and since the mount is too short I had real problem hanging it exactly where I wanted, ended up having it off the desired position by 4 inches.
So overall, this is a good mount, but it needs to be 4-8 inches longer.
Date published: 2012-04-02
Rated 5 out of
5
by
ddutton from
wicked good
Its always amazing to me to see a company like Sanus lead the way to all imatators. This mount is rock solid and a steal for the price, its post level adjustments are very good and easy to reach and adjust. This mount leaves ample space to locate electrical and video cables, so in a tricky spot this mount will make it possible. Sanus Keep Up the Good Work!
Date published: 2010-12-08
Rated 5 out of
5
by
Schwartz from
Great tilt bracket
This is a great bracket. LIghtweight and easy to install. It also has a nice opening in the center of the wall plate for locating your powersource and or additional cabling. The unit tilts easily and has the added feature of a slight upwards tilt for easy access to the wires attached to the TV. Durable and reasonably priced.
Date published: 2009-06-30
Rated 5 out of
5
by
Christine from
Easy Setup
It was easy to understand how to put this mount together and up on the wall. The best part was being able to install my cables easily.
Date published: 2009-06-23
Rated 4 out of
5
by
Johnny from
Great updates
This product has a lot of great updates to the VMPL50. Easier to mount & adjust. Locking mechanism is simple and smart.
Date published: 2009-05-28
SANUS is the #1 best-selling
TV mount brand in the U.S.*
-
Safety Tested and UL Certified
Safety tested and UL Certified
Questions? Contact Us
Monday - Friday 8am - 7pm CST
Saturday - Sunday 10:30am - 7pm CST
*Circana, Retail Tracking Service, U.S., Flat Panel Mounts, Dollar Sales, Annual 2023.